home *** CD-ROM | disk | FTP | other *** search
- TITLE: 950117 A:\COUNTRY.SYS IS INCORRECT ON DISK #1 WHEN INSTALLING
- OS/2 WARP.
-
- DESCRIPTION OF SYMPTOMS:
- Installing OS/2 WARP, on disk #1 encountered " A:\country.sys
- is incorrect ".
-
- RESOLUTION:
- Check the CMOS. If the user has changed the floppy drives
- around, make sure the CMOS is setup correctly.
- Example, if the user switch 1.44mb drive from B to A, and 1.2mb
- drive from A to B, CMOS must be setup and change that reflect
- the A drive as 1.44mb and B drive as 1.2mb.
- Note:
- Some floppy drives controller has the ability to override the
- cmos. This means that the card is set for the original setup.
- For example, if the card is setup for 5 1/4" as A: drive and
- the user switched the 3 1/2" drive to become A: drive and go into
- the cmos and change it, when bootup, the card will override
- the setup on the cmos and still make the 5 1/4" as A:.
- Advice user to check the controller manual to disable this option
- on the card. Or refer him/her back to where they bought the
- controller card.
- Update: 01/17/1995
-